(303) 825-8555
5515 W Warren Avenue
Denver, CO 80227
 
/images/store/63/Concrete_Pour_pict.jpg/images/store/63/Concrete_Pour_Trowel_3.jpg/images/store/63/Contractor_W-Plans_6.jpg
/images/store/63/CraneSunset.jpg/images/store/63/Drywall_App_4.jpg/images/store/63/Grading_5.jpg
/images/store/63/Industrial_pict.jpg/images/store/63/Masonry_App_7.jpg/images/store/63/Masonry_pict.jpg
/images/store/63/Plywood_pict.jpg/images/store/63/Tilt-Up_Workers_App_2.jpg/images/store/63/Tilt-Up_Workers_App_4.jpg
 
BROWSE CATEGORIES
 

Search:

Block and Brick Designs Form Liners

VFL341

Vinylex

4' x 10'-0 3/8" Sheets • 8" Square Split Face Block
(click image to enlarge)
Quick Overview

  • The warranty requires a pre-construction mock-up and must mirror actual job conditions and methods.

  • Deeper patterns may require back-up strips to support the liner and are noted in the pattern details given in this catalog.

  • The dimensions given are nominal. Temperature changes can cause the liner to expand or contract and should be considered during design and installation.

  • Liners will become more rigid at temperatures below 25°F and should be handled carefully under such conditions.

  • Liners are UV stabilized, but should not be exposed to direct sunlight for prolonged periods.

  • Liners should not be used if concrete temperatures will exceed 140°F or in precast applications employing heated beds.

  • Type 3 concrete with accelerators creates high heat, which can cause damage to the liner.

  • Form Release 7000 is recommended for all liner grades. It is not required for Single-use liners, but the appearance of the concrete will benefit from an application of the release agent.

  • Use a single concrete supplier for uniformity and place the concrete with an elephant trunk to minimize aggregate segregation. Vibrate the concrete to eliminate lift lines and to minimize voids.

  • Clean the liner between casting with a mild detergent and brush and reapply the release agent before each pour.

  • Most form liners are manufactured to order and can not be returned or exchanged.
Interested in this item or want more information?
Call Mon. through Fri. 7:30 AM - 4:00 PM MST
Phone: (303) 825-8555
Email: chris@contractorssupply.com

Can't find what you want? Give us a call and we can help you find it.
Additional Information
Manufacturer: Vinylex
 
Search:
 
© 2013- Contractors Supply Inc. | All Rights Reserved
 

Warning: SOME PRODUCTS WE SELL MAY CONTAIN ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR REPRODUCTIVE HARM. For more information please visit https://oehha.ca.gov/proposition-65